BCLTY - E-Z WELD (PVC CEMENT)
- MSDS: BCLTY
- Manufacturer: PCI INDUSTRIES INC
- Product Name: E-Z WELD (PVC CEMENT)
- National Stock Number: 8040-00N006038
Product Identification
Product ID:E-Z WELD (PVC CEMENT)
MSDS Date:01/01/1985
FSC:8040
NIIN:00N006038
MSDS Number: BCLTY
Responsible Party
Emergency Phone: 305-844-0241
Cage: OO232
Contractor
Telephone: 305-844-0241
Cage: OO232
Ingredients
DIMETHYLFORMAMIDE
CAS: 68-12-2
RTECS: LQ2100000
Fraction By Weight: 9%
OSHA PEL S, 10 PPM
ACGIH TLV: S, 10 PPM; 9192
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
CYCLOHEXANONE (SARA III)
CAS: 108-94-1
RTECS: GW1050000
Fraction By Weight: 20%
OSHA PEL S, 50 PPM
ACGIH TLV: S, 25 PPM; 9293
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
TETRAHYDROFURAN (SARA III)
CAS: 109-99-9
RTECS: LU5950000
Fraction By Weight: 31%
OSHA PEL 200 PPM/250 STEL
ACGIH TLV: 200 PPM/250STEL;9192
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III)
CAS: 78-93-3
RTECS: EL6475000
Fraction By Weight: 30 - 48%
OSHA PEL 200 PPM/300 STEL
ACGIH TLV: 200 PPM/300STEL 9192
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
PIGMENTS
Fraction By Weight: 10%
Hazards
Effects of Overexposure:EYE/SKIN: SEVERE IRRIT. VAPOR: RESP TRACT
IRRIT,DIZZY,HEADACHE,ASPHYXIATION. INGESTION: GI IRRIT
First Aid
First Aid:EYE: FLUSH WITH WATER 15 MINUTES,GET MED ATTN. SKIN: WASH
WITH SOAP & WATER,CALL PHYSICIAN. INHALATION: REMOVE TO FRESH
AIR,GIVE ARTIF RESP IF NEEDED,CALL PHYSICIAN. INGESTION: TAKE 2
GLASSES OF MILK AND INDUCE VOMITING,CALL PHYSICIAN IMMEDIATELY
Fire Fighting
Flash Point:6F/-14C (OC)
Lower Limits:2.0
Extinguishing Media:ANSUL PURPLE-K POTASSIUM BICARBONATE,ALCOHOL RESIST
FOAM
Fire Fighting Procedures:SELF-CONTAIN BREATH APP,PRESSURE DEMAND FULL
FACE PLATE
Unusual Fire/Explosion Hazard:VAPORS MAY TRAVEL ALONG GROUND TO
DISTANCE IGNITION SOURCES. EMPTY CANS W/RESIDUE CAN IGNITE AS ABOV
Accidental Release
Spill Release Procedures:SECURE SOURCES OF IGNITION, VENTILATE AREA &
ALLOW TO EVAPORATE, ABSORB LIQUID ON PAPER OR OTHER ABSORBENT MODE
& PLACE IN SAFETY CONTAINER.
Handling
Handling and Storage Precautions:STORE IN COOL,DRY AREA AWAY FROM
SOURCES OF IGNITION.
Other Precautions:EMPTY CONTAINERS RETAIN PRODUCT RESIDUAL,WHICH MAY BE
HAZARDOUS.
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED RESP DEVICE IN ACCORD WITH
EXPOSURE OF CONCERN.
Ventilation:LOCAL/MECHANICAL TO MAITAIN BELOW TLV
Protective Gloves:POLYVINYL ALCOH
Eye Protection:CHEM SPLASH GOGGLES
Other Protective Equipment:IMPERVIOUS CLOTHING & BOOTS TO PREVENT SKIN
CONTACT
Supplemental Safety and Health
MFR ADDRESS: 925 WEST 17TH STREET,RIVIERA,FLORIDA 33404
Chemical Properties
Boiling Pt:B.P. Text:180F/82C
Vapor Pres:143
Vapor Density:2.5
Spec Gravity:0.93
Evaporation Rate & Reference:3.8 (BUTYL ACET)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:LIGHT YELLOW COLOR,STRONG SOLVENT ODOR
Percent Volatiles by Volume:86
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS & HALOGENATED HUDROCARBONS
Stability Condition to Avoid:SOURCES OF IGNITION OR HEAT.
Disposal
Waste Disposal Methods:COMPLY WITH LOCAL,STATE AND FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.